Tray Cable is used for installation in trays, wire ways, troughs, channels ducts and conduit and designed to supply power motors, or for connection to other power devices.
Learn MorePetroleum
Our wire and cable plays mission-critical roles in refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for Scanners, burners and monitors and supplying electricity for motor leads. Our fire-rated cables can be used to replace expensive fire rated structures, blankets or wraps and the difficult
Our wire and cable play mission-critical roles in: refinery trays, power cables, thermocouple temperature sensing, instrumentation cable for scanners, burners and monitors and supplying electricity for motor leads.
Our fire-rated cables can be used to replace expensive fire-rated structures, blankets or wraps as well as the MI cable which can be difficult to install. Fire-resistive cables pass the extreme flame test standards of UL 2196/ULC S-139, European Standard IEC 60331 and Military Standard MIL-DTL-24643. Our 200C/250C/450C ignition cables are a compact design and are cut and terminated with conventional tools. They are chemical resistant and exhibit a very low coefficient of friction. Our low-voltage instrumentation cables are used for high heat and chemical-resistant applications where conventional cables have failed.
250°C PLTC (Power Limited Tray Cable) UL Listed Unshielded 300V
Designed for use as instrumentation, process control and computer cables in Class II or III Power-Limited Circuits as defined in NEC article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 250°C. They may be installed in cable tray, in any raceway, as open runs of cable. The overall shield eliminates most of the static interference from the electric field radiating by power cables and other electrical equipment.
Learn More250°C Shielded PLTC (Power Limited Tray Cable) UL Listed, 300 V
Designed for use in instrumentation, process control, and computer cables in Class II or III Power-Limited Circuits as defined in NEC Article 725. They are suitable for installation in wet or dry locations with conductor operating temperature up to 250°C. They may be installed in cable tray, in any raceway, as open runs of wire.
Learn More200°C (392°F) FEP Fluoropolymer Insulated Sensor / Instrumentation / Control Cable 600 Volt
Suitable for use in trays, industrial plants, and other areas where resistance to oils, acids, solvents and fluid are required. Not UL Listed. This cable is manufactured per quality manufacturing practices.
Learn More200°C (392°F) Modified FEP Insulated Shielded Tray Cable (TC) 600 Volt
Tray Cable are used for installation in trays, wireways, troughs, channels ducts and conduit and aerially where supported by a messenger.
Learn More200°C (392°F) Modified FEP Insulated Unshielded Tray Cable (TC) 600 Volt
Tray cables may use for installation in trays, wire ways, troughs, channels ducts and conduit and aerially where supported by a messenger.
Learn More200°C (392°F) Sensor and Instrumentation Cable FEP Insulation/ Silicone Rubber Jacket 600 Volt
This cable is designed for kilns, commercial cookers, sensors, thermal protection devices, lighting fixtures, plastics melting or similar applications requiring a flexible 200°C cable.
Learn More200°C (392°F) Silicone Rubber Multi-Conductor Cable 600V
Applications include: lighting equipment, rotating machinery, plastics machinery, high-temperature interconnect cable etc.
Learn More- « Previous Page
- 1
- 2
- 3
- 4
- …
- 6
- Next Page »